M-LOK Weight Kit — Pair

Photo guide

• Thick / Heavy: The first three photos show the thicker weight housings, including the front view of the installed pair.
• Slim: The final four-panel image shows the slim weight housings in its upper two panels. Its lower panels show the customer-supplied steel insert and the included 7/32-inch drill guide. Steel inserts are not included.

Steel weights are not included. This kit includes two printed weight housings with lids and a printed drill guide. Steel flat-bar inserts must be purchased separately.

The Precision Garage M-LOK Weight Kit uses printed carriers and lids to hold steel inserts. Choose the slim profile or the thicker, heavier profile. Both configurations are sold in pairs: each purchase includes two weight modules and a printed drill guide.

• Slim — $15 per pair: requires one customer-supplied steel insert per module; two inserts total (not included).
• Thick / Heavy — $20 per pair: requires two stacked customer-supplied steel inserts per module; four inserts total (not included).

Steel inserts required

Use 1½-inch-wide × ¼-inch-thick mild-steel flat bar, cut into 82 mm (approximately 3.23-inch) lengths. A 3ft bar can be found at your local hardware store for ~$15. For a slim pair, cut two pieces. For a thick / heavy pair, cut four pieces and stack two in each module. Steel (or whatever you choose) inserts are customer-supplied.

Included drill guide

A printed drill guide is included with the kit to help locate the mounting-hole centers in the steel inserts. The final hole size is 7/32 inch. Use the guide to mark the hole centers, then remove it before drilling the steel. Deburr the inserts before installation.

Made to order: Ships within 3–5 business days after ordering. Production time is separate from carrier transit time. Orders containing multiple products ship together when all items are ready.